BERNINA Mega Hoop Embroidery Hoop – 150 × 400 mm

• The maximum embroidery area is 150 × 400 mm.
• The repositioning hoop has three attachment positions.
• Large designs, design combinations and borders can be embroidered without rehooping the fabric.
• The included template helps with precise positioning.
• The machine requests a required position change during stitch-out.
• The hoop is compatible with the BERNINA embroidery machines assigned in the Machine Pass.
• This is an original BERNINA accessory.

Hoop the fabric and suitable stabilizer in the Mega Hoop according to the BERNINA instructions and use the template to align the design. Attach the hoop to the embroidery module in the position specified by the machine.

Start embroidering. If the next design area requires a position change, the machine stops and displays the change. Raise the needle and presser foot, release only the front end of the attachment mechanism and carefully move the hoop into the requested upper, middle or lower position until it engages.

Before continuing, check that the fabric and upper thread are clear and that the hoop is correctly engaged. Remove the hoop after completing the design as described in the instructions.