Brother Threader for Brother V3 and V5

This threader is a specially designed replacement part for Brother Innov-is V3 and Brother Innov-is V5 embroidery machines. It replaces the original threading mechanism and ensures that the upper thread is correctly guided through the needle eye again.

The threader hook is a precision-engineered mechanical component that has been precisely manufactured and perfectly matched to the mechanics of the mentioned models. This restores the automatic threading function, provided the rest of the machine's mechanics are intact.

Important note: This is a spare part that requires technical knowledge for installation. A retaining clip (E-clip) must be removed for assembly. Improper installation can lead to malfunctions and affect the durability of the threader.

This spare part is particularly suitable for users whose threader hook is bent, worn, or broken, and who want to restore their machine to full functionality.

The threader impresses with its precise manufacturing and exact alignment with the mechanics of the Brother Innov-is V3 and V5. As a delicate component, it ensures reliable thread guidance through the needle eye and supports the machine's automatic threading function. The construction is designed for durability but requires careful handling and professional assembly, as even the smallest deviations can impair its function. Especially with intensive use or after mechanical stress, this spare part offers an effective way to restore the machine's original functionality.

The threader replaces the broken or bent threader hook on your machine. For replacement, the machine should be carefully laid on its back to give you better access to the threading unit.

Before removal, it is advisable to take a photo of the existing position. This will make it easier for you to check how the assembly needs to be reinserted later.

First, the retaining clip, also known as an E-clip, is carefully removed. Then, the spring is unhooked, and the entire threader assembly is pulled down from the rod. After that, the new threader can be replaced in the assembly.

Before sliding the assembly back onto the rod, the spring should be pulled forward on the hook. This can be done, for example, with a piece of sewing thread. Then, the assembly is reattached, the spring is re-hooked, and the retaining clip is correctly inserted.

After assembly, the function of the automatic threader should be checked. It's best to test the mechanism first without a needle. If everything runs smoothly, insert a suitable needle, ideally larger than NM 70, and check if the thread is reliably guided through the needle eye.

Name: Brother Sewing Machines Europe GmbH
Anschrift: Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel - Germany
Kontakt: Tel.:+49 (0)6101-9814--0, E-mail: info@brothersewing